A clean and simple design, featuring an easy-to-use trim system and our innovative Click-In Loop Quick Release.

Features:

• Click in Loop
• Two Release Modes
• Three Loop Size Options
• Spinning Head with Anti-twist Flag Out Line
• Soft Bar Ends with Leader Line Adjustment
• Bio-based Dyneema® Modular Flying Lines
• Ergonomic EVA Grip
• Stainless Steel Leader Line Pin
• Light Weight Aluminium Centre Piece
• PU Covered De-power Line
• Stainless Steel Trimmer Bracket
• Clamcleat Trimmer
• Trim Line Grab Handle
• Re-launch Balls

Click-In Loop

Push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified

Modular Design

Our modular design makes adding or removing extensions quick and easy via removable pigtail end connectors.

Ergonomic EVA Grip

3D pressed EVA with ergonomic shaping and a lightly sanded finish provide the ultimate bar grip. It is colour coded with the leader lines and flying lines for an added visual safety feature.

Important Notes:

Below the Bar Release (Recommended Mode)

All riders should attach their Kite Leash to the Flag Out System. This is the small eyelet on the Stainless Steel Swivel Ring.
When the release is activated, the kite will flag out and fall to the water/ground.

Advanced Riders

(Use at your own risk, not recommended) 

Riders performing unhooked tricks or who are more confident and have spent many hours Kiting can attach in Expert mode, where the loop part runs through the large eye of the steel ring. When letting go of the bar in Expert mode (without activating the release e.g. missed handle pass) the kite will depower but WILL NOT flag out.

Be aware in this situation, the Quick Release will be out of reach and can therefore not be released. When hooked in and activating the Quick Release the steel ring automatically slips off and the kite will flag out.

Keep it Clean:

In all situations make sure that all lines are clear of all working release systems and the kite leash is connected in the right way.

Always clean your control system with fresh water after every session, and reload/release the Click-In Loop to check the system is functioning correctly. Store your control system with the Click-In Loop release open. Reload the next time you set up your kite.